Beurer medical BM 49 Mode D'emploi page 50

Set date, time and language
This menu allows you to set the following functions, one after another.
Date Time Language
It is essential to set the date and time. Otherwise, you will not be able to save your measured values correctly
with a date and time and access them again later.
The time is displayed in 24-hour format.
In addition, the device has 4 language settings. The device is set to German when supplied to the customer.
If you press and hold the function buttons
• Insert the batteries or press and hold the Memory button
5 seconds.
The year flashes on the display.
• Set the year with the function buttons
Memory button .
• Set the month, day, hour and minutes and confirm each setting
with the Memory button .
The language will flash on the display
• You can select the following languages with the function buttons
= German
= French
= Italian
= Dutch
= Language off
Confirm your selection with the Memory button .
= Language off means that there is no voice output and
therefore no acoustic playback.
Volume level Vo1 flashes on the display.
• You can set the volume of the selected language using the func-
tion buttons :
Vo3 = loud
Vo2 = medium
Vo1 = quiet
Confirm your selection with the Memory button .
Operation with the mains part
You can also operate this device with a mains part.
When doing so, there must not be any batteries in the battery compartment. The mains part can be ob-
tained from specialist retailers or from the service address using order number 071.60.
• To prevent possible damage to the device, the blood pressure monitor must only be used with the mains
part described here.
• Insert the mains part into the connection provided for this purpose on the right-hand side of the blood
pressure monitor. The mains part must only be connected to the mains voltage that is specified on the
type plate.
• Then insert the mains plug of the mains part into the mains socket.
• After using the blood pressure monitor, unplug the mains part from the mains socket first and then dis-
connect it from the blood pressure monitor. As soon as you unplug the mains part, the blood pressure
monitor loses the date and time setting but the saved measurements are retained.
Volume
, you can set the values more quickly.
and confirm with the
.
50
Voice output
for The device is ready for use.
You may start measuring.
:
Deutsch
Français
Italiano
Nederlands