Drive TRS 130 Manuel D'utilisation page 6

EN
Inter- and unlock of armrests
Pull both armrests upwards until they audible engage
the interlock. The interlock occurs automatically.
Make sure that the interlock is successful on both sides,
on this occasion, the locking pin (1) must be visible.
In order to unlock the armrests move the locking button
to the back (2) and swing the armrest downwards.
ATTENTION: It may be possible that the armrest is a little
bit bent during transport, this can be postbent easily
until the locking button in front properly locks.
2
Double function full stop brake
To interlock the brake press lever downwards. This will
lock the direction of the wheel in place.
To open brake press other lever.
6
1
Fitting footrests
Hang up the provided footrests with both drillings as
shown in the respective hold pins.
Interlock and unlock footrests
In order to interlock the footrests turn them to the middle
until its audible engage. In order to unlock press the
lever as shown inwards.
Height adjustment of footrests
To adjust the footrests in the height first unlock the
fixing clamp (1). After pinching the fixing bolts (2) the
footrests can be shifted (3) in 4 steps in the height for
leg lengths from 420 – 500 mm.
ATTENTION: Never use the foot rest as stand up device !
1 2
Bucket
Insert or remove the toilet bucket (also with put on lid)
always from the back.
The toilet bucket engages, the toilet seat can be taken
simply upwards for cleaning.
PRESS
3