Web Interface With Raspberry Pi - Festo MPS 404-1 Notice D'utilisation

404-1 System, Distributing Pro-Joining-Measuring Pro-Sorting Inline – Operating instructions

9.7 Web interface with Raspberry Pi

The Measuring Pro station contains a Raspberry Pi as well as a touch monitor to show the measurement
data which are displayed on a website.
The website is hosted on the MES PC and can be accessed at:
172.21.0.90:18812/ui
or
mes-pc.festo.systems:18812/ui
The IP address of the Raspberry Pi device is 172.21.55.23. The device must be connected to the MES PC in
order to display the web interface.
Description of the web interface
1 Height measurement determined by the station. This is transferred back to the MES.
2 Target or limit values for the height transmitted by the MES.
3 Current measurement value of the "Tactile measurement" module. This is also displayed in the diagram below it.
4 Current measurement value of the "Scales" module. This is also displayed in the diagram below it.
5 Weight determined by the station. This is transferred to the MES.
6 Target or limit values for the weight transmitted by the MES.
7 Graphical representation of the upper limit value.
8 Graphical representation of the lower limit value.
9 Status information on the measurement procedures.
10 Graphical representation of the lower limit value.
11 Graphical representation of the upper limit value.
42
© Festo Didactic 8150266