Elipson IW6 Mode D'emploi page 20

UK
WARNING
Packaging
The packaging (box and packing) was designed for effective protection of your ELIPSON
electronics during transportation and shipping. Please save them for later use. Protect
the environment : if you wish to dispose of the packaging, please do so in the most
environmentally responsible manner possible according to available measures (for example,
sorted recycling). At the end of its life, this device should not be disposed of the same way as
household refuse. It should be returned to a center for the recycling of electronic equipment.
This symbol on the product indicates that it has been designed so that it can be recycled
according to specific procedures. You will therefore be making a significant contribution to
the protection of the environment. This device respects the RoHS European directive. This
means that it does not emit polluting substances when it is recycled (such as lead, mercury,
cadmium, hexavalent chromium, polybromobiphenyles, polybromdiphenylethers).
Precautions for proper use
This product was designed according to rigorous norms and complies with safety
standards. It should only be used under normal conditions as described below.
Verify the electrical voltage before connecting it to a power source. This electronic
device was designed to work in numerous countries. We advise you to hook it up
completely before connecting it to the AC power source. Take care when unplugging the
power cord. When you unplug the power cord from the power source, do so by pulling on
the head of the plug rather than on the cable. If you do not expect to use this device for a
prolonged period of time, you are advised to unplug it from the power source. Do not open
the case. This device contains no parts that can be exchanged by the user. Accessing the
inside of this device's case can lead to electric shock. Any modification to the product will
nullify the guarantee. If a foreign object or liquid falls into the case, contact your retailer to
arrange for a technician to remove it from the device safely.
Terms of limited warranty
The warranty is limited to equipment repair. Neither transportation, nor any other costs, nor
any risk for removal, transportation and installation of products is covered by this warranty.
The warranty is only valid for the original purchaser and is not transferable. The warranty
will not apply in cases other than defects in materials and / or workmanship at the date of
purchase and will not be applicable in the following cases :
- Damages caused by wrong or incorrect installation or connection.
- Damages caused by incorrect use, other use than the one described in the owner's
manual, negligence, unauthorized modification or use of parts or of accessories that are
not authorized by Elipson.
- Damages caused by unauthorized, unsuitable or faulty ancillary equipment.
- Damages caused by accidents, lightning, water, fire, heat or any other disturbance that
would not be under Elipson control or responsibility.
- For products, which serial number has been altered, deleted, removed or made illegible.
- In case of repair and service executed by an unauthorized service person.
WARRANTY
Elipson In range has been designed and manufactured to the highest
quality standards. If something goes wrong with your product, Elipson or
its authorized distributor / dealer will handle the service and repair under
these limited warranty terms. This limited warranty is valid for a 2-year
period from original purchase date from an authorized Elipson dealer.
20