Product Description And Specifications; Intended Use - Bosch GTM 12 JL Professional Notice Originale

OBJ_BUCH-1688-004.book Page 38 Tuesday, July 9, 2013 11:59 AM
38 | English
 Only saw one workpiece at a time. Workpieces placed on
top or aside of each other can cause the saw blade to jam or
the workpieces to move against each other while sawing.
 Always use the parallel guide or the angle guide. This
improves the cutting accuracy and reduces the possibility
of saw blade binding.
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Symbol Meaning
 Laser Radiation
Do not stare into beam
Class 2 laser product
Do not dispose of power tools into house-
hold waste!
Only for EC countries:
According to the European Guideline
2012/19/EU for Waste Electrical and
Electronic Equipment and its implementa-
tion into national right, power tools that
are no longer usable must be collected
separately and disposed of in an environ-
mentally correct manner.
 Keep hands away from the cutting
area while the machine is running.
Danger of injury when coming in con-
tact with the saw blade.
 Wear a dust respirator.
 Wear safety goggles.
1 609 92A 0BP | (9.7.13)
Symbol Meaning
 Wear ear protectors. Exposure to
noise can cause hearing loss.
 Danger area! Keep hands, fingers or
arms away from this area.
305mm
Ø max.
Ø
300mm
Ø min.
Observe the dimensions of the saw blade.
The hole diameter must match the tool
spindle without play. Do not use reducers
or adapters.
2 mm
51 mm
When changing the saw blade, pay atten-
tion that the kerf width is not less than
2.0 mm and the blade body thickness not
greater than 2.0 mm. Otherwise, there is
danger that the riving knife (2.0 mm) be-
comes wedged in the workpiece.
When operating the combination saw as a
table saw, the maximum workpiece height
is 51 mm.
Symbol on the lever 11 for tilting and lock-
ing the retracting blade guard
and
symbol on the tool arm release button 17
for releasing the tool arm.
Symbol for use of the combination saw as
a chop and mitre saw.
Symbol for use of the combination saw as
a table saw.

Product Description and Specifications

Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. Horizontal
mitre angles of –48° to +48° as well as vertical bevel angles
of –2° to +47° are possible.
30mm
Bosch Power Tools