Specifications - Yamaha XDA-AMP5400RK Mode D'emploi

SPECIFICATIONS

Specifications
The specifications of the unit are as follows.
Input jacks
Analog Audio
• Stereo Audio (RCA) x 4
Output jacks
Analog Audio
• Speaker Out x 4 (L/R)
• Stereo Audio (RCA) x 4
Other jacks
Trigger In x 4
Trigger Out x 4
Remote In x 1
Remote Out x 1
Audio Section
Rated Output Power
• (2-channel driven, 1 kHz, 0.9% THD, NORMAL, 4/8 Ω)
• (2-channel driven, 1 kHz, 0.9% THD, BRIDGE, 8 Ω)
• (1-channel driven, 1 kHz, 0.9% THD, NORMAL, 4/8 Ω)
• (1-channel driven, 1 kHz, 0.9% THD, BRIDGE, 8 Ω)
Dynamic Power
• (2-channel driven, 20 Hz to 20 kHz, 0.08% THD,
20ms Burst, NORMAL, 4/8 Ω)
• (2-channel driven, 20 Hz to 20 kHz, 0.08% THD,
20ms Burst, BRIDGE, 8 Ω)
• (2-channel driven, 1 kHz, 0.9% THD, 20ms Burst,
NORMAL, 4/8 Ω)
• (2-channel driven, 1 kHz, 0.9% THD, 20ms Burst,
BRIDGE, 8 Ω)
• (All channel driven, 1 kHz, 0.9% THD, 20ms Burst,
NORMAL(8-ch), 4/8 Ω)
• (All channel driven, 1 kHz, 0.9% THD, 20ms Burst,
BRIDGE(4-ch), 8 Ω)
Maximum Effective Output Power (JEITA)
• (1-channel driven, 1 kHz, 10% THD, NORMAL, 4/8 Ω)
• (1-channel driven, 1 kHz, 10% THD, BRIDGE 8 Ω)
Total Harmonic Distortion (THD)
• (20 Hz to 20 kHz, SP OUT, 25 W, 8 Ω)
Frequency Response (+0/-3 dB)
• SP OUT (AMP IN)
Signal to Noise Ratio (IHF-A)
• SP OUT (AMP IN)
Maximum Input Signal
• AMP IN (1 kHz, 0.9% THD)
Gain
• SP OUT (1 V INPUT)
Input Sensitivity
• 1 W power (1 W/8 Ω output)
90/50 W
• MAX power (50 W/8 Ω output)
100 W
General
100/50 W
Power Supply
200 W
• [U.S.A. model]
• [Other models]
Power Consumption
80/40 W
• Amp1 - Amp4 On, No Signal Condition
• Amp1 - Amp4 Off, Audio Sense On, Audio Sense Mode Active
150 W
Standby Power Consumption
100/50 W
• Audio Sense Off
• Audio Sense On, Audio Sense Mode Standby
200 W
Dimensions (W x H x D)
80/50 W
170 W
Weight
AC 120 V, 60 Hz
AC 220 to 240 V, 50/60 Hz
437 x 46 x 443 mm (17-1/4" x 1-3/4" x 17-3/8")
130/65 W
260 W
0.04% THD
5 Hz to 40 kHz
108 dB
1.0 V
25.8 dB
150 mV
1.0 V
130 W
32 W
14.8 W
0.3 W
0.5 W
6.0 kg (13.2 lbs)
EN
En 13