Enjoying Dolby Pro Logic Surround Sound - NAD L56 Manuel D'installation

ENJOYING DOLBY PRO LOGIC SURROUND SOUND

DOLBY PRO LOGIC SURROUND
You can still enjoy the excitement of Surround Sound even if your A/V receiver does not offer Dolby Digital (AC-3) decoding.
If your A/V receiver has a Dolby Pro Logic decoder, refer to the following connection diagram.
Connection example
Amplifier equipped with
Dolby Pro Logic Surround
Connect one or two rear
speakers. The output
sound from the rear
speakers will be monaural
even if you connect two
rear speakers.
WITH A RECEIVER EQUIPPED WITH DOLBY DIGITAL
Connect the equipment the same way as described in "Enjoying Dolby Digital (AC-3) Sound" on the previous page. Refer to that receiver's owner's
manual and set the receiver so you can enjoy Dolby Pro Logic Surround sound..
WARNING
Do not set the Digital Audio Output of this DVD player to "Dolby Digital" unless you are connecting the DIGITAL AUDIO jack of this DVD player
to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers (Refer to
"Selecting Digital Audio Output" on page 37).
CONNECTING TO OPTIONAL AUDIO SYSTEM
To Video Out
L76 Rear
Video Cable
To Video Input
L76 Receiver
Front
speaker
(Left)
Rear speaker (Left)
Installation
To MIXED Audio Out
Audio Cable
To Audio Input
Front
speaker
Centre
(Right)
Speaker
Rear speaker (Right)
GB
21