System Startup; System Software - Clevo P150SM Guide Utilisateur Concis

System Startup

1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Insert the battery and make sure it is locked in position.
4. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack at the rear of the
computer, then plug the AC power cord into an outlet, and
connect the AC power cord to the AC/DC adapter.
6. Use one hand to raise the lid/LCD to a comfortable viewing angle
(do not to exceed 135 degrees); use the other hand (as illustrated
in Figure 1) to support the base of the computer (Note: Never lift
the computer by the lid/LCD).
7. Press the power button to turn the computer "on".

System Software

Your computer may already come with system software
pre-installed. Where this is not the case, or where you are
re-configuring your computer for a different system, you
will find this manual refers to Microsoft Windows 8.1.
HDD RAID Support
Your hard disk(s) can be set up in AHCI mode or RAID
mode (for increased performance or protection). Note that
setting up your hard disk(s) in RAID mode needs to be done
prior to installing the Windows OS.
4
Note that you should al-
ways shut your computer
down by choosing the Shut
down command in Win-
dows (see below). This will
help prevent hard disk or
system problems.
Click
Charms Bar (use the Win-
dows Logo Key
key combination to access
the
choose Shut down from
the Power menu.
Or
Choose Shut down or
sign out > Shut down from
the context menu (use the
Windows Logo Key
X key combination to ac-
cess the context menu).
135°
Opening the Lid/LCD/Com-
puter with AC/DC Adapter

Shut Down
Settings in the
+ C
Charms Bar) and
+
Figure 1
Plugged-In