Wireless Display - Clevo P150SM Guide Utilisateur Concis

Wireless Display

Wireless Display uses your Wireless LAN module/
WLAN/Bluetooth Combo module (you need to make sure
that your video adapter/display device is compatible with
your particular WLAN/Combo module) in conjunction
with a compatible video adapter/display device (pur-
chased separately) to allow you to display the contents of
the notebook display on another display (e.g. HDTV),
without the need to have cables stretching across a room.
You can then play games, browse the internet, display vid-
eos or photo slide shows on your TV/external display
without using HDMI or A/V cables.
Before configuring Wireless Display you will need to set
up your compatible adapter with your display. Connect
the adapter using an HDMI or A/V cable and turn on the
display, and then set the display to the appropriate input
channel (see the documentation supplied with your com-
patible adapter for full details).
Note that no driver or application is required for wireless
display in Windows 8.1.
Wireless Display Configuration
1. Note that no driver or application is required for wireless display
in Windows 8.1.
2. Go the Charms Bar, and select Devices.
3. Click Project.
4. Click Add a wireless display.
5. The system will then search for compatible display devices
(this may take up to 60 seconds so allow time for this to
complete).
6. Double-click any detected display device in the list.
7. You may then need to input a pin number for the device to
which you are connecting.
8. Click Next.
9. The display will then connect (for specific settings for your
display see the documentation supplied with your compatible
adapter/display for full details).
10. Go to the Project menu (Charms Bar > Devices) and click
Disconnect to temporarily disconnect from the wireless display.
11. To permanently disconnect from the display (you will need to go
back through the connection process again) you can select it in
PC and Devices > Devices and click Remove Device > Yes.
29