System Startup - Clevo W970LUQ1 Guide Utilisateur

System Startup

1. Remove all packing materials.
2. Place the computer on a stable surface.
3. (Models B & C Only) Insert the battery and make sure it is
locked in position.
4. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
5. Attach the AC/DC adapter to the DC-In jack on the left of the
computer, then plug the AC power cord into an outlet, and
connect the AC power cord to the AC/DC adapter (make sure
you use the adapter when first setting up the computer, as to
safeguard the computer during shipping the battery will be locked
to not power the system until first connected to the AC/DC
adapter).
6. Use one hand to raise the lid/LCD to a comfortable viewing angle
(do not exceed 130 degrees); use the other hand (as illustrated in
Figure 1) to support the base of the computer (Note: Never lift
the computer by the lid/LCD).
7. Press the power button to turn the computer "on".
System Software
Your computer may already come with system software
pre-installed. Where this is not the case, or where you are re-
configuring your computer for a different system, you will
find this manual refers to Microsoft Windows 8.1.
4
Note that you should al-
ways shut your computer
down by
Shut down command in
Windows
This will help prevent hard
disk or system problems.
Click the
icon
in
Start
Screen and choose Shut
down from the menu.
Or
Right-click the Start button
130
ﾟ
Start Screen or the Desk-
top
down or sign out > Shut
down from the context
menu.
Opening the Lid/LCD/
Computer with AC/DC
Adapter Plugged-In

Shut Down
choosing the
(see below).
the
at the bottom of the
and choose Shut
Figure 1