Intel® Rapid Start Technology - Clevo P150SM Guide Utilisateur Concis

14. Type "select Volume #" (# is volume of your storage partition
so refer to results obtained from "detail disk" for the exact
volume number).
15. The message "Volume # is now the selected volume." will
appear.
16. (MBR)
Type "set id=84 override" (the id must be set to 84).
(GPT)
Type "set id=D3BFE2DE-3DAF-11DF-BA40-E3A556D89593".
17. The message "DiskPart successfully set the partition ID."
will appear.
18. Close the CMD window.
19. Go the Windows control panel and double-click
Administrative Tools (System and Security) > Computer
Management > Storage > Disk Management.
20. The disk partition should read Healthy (Hibernation Partition).
21. Restart the computer.
22. Install the driver (see below).
36
Intel® Rapid Start Technology Driver Instal-
lation
1. Click Option Drivers (button).
2. Click 6.Install Rapid Start Driver > Yes.
3. Click Next >Next > Yes > Next > Next.
4. Click Finish to restart the computer