System Startup - Clevo ONE K56-5O Guide Utilisateur

System Startup

1. Remove all packing materials.
2. Place the computer on a stable surface.
3. Securely attach any peripherals you want to use with the
computer (e.g. keyboard and mouse) to their ports.
4. When first setting up the computer use the following
procedure (as to safeguard the computer during shipping, the
battery will be locked to not power the system until first connected
to the AC/DC adapter and initially set up as below):
• Attach the AC/DC adapter cord to the DC-In jack at the rear of
the computer, then plug the AC power cord into an outlet, and
connect the AC power cord to the AC/DC adapter and leave it
there for 6 seconds or longer.
• Remove the adapter cord from the computer's DC-In jack, and
then plug it back in again; the battery will now be unlocked.
5. Use one hand to raise the lid/LCD to a comfortable viewing angle
(do not to exceed 135 degrees); use the other hand (as illustrated
in Figure 1) to support the base of the computer (Note: Never lift
the computer by the lid/LCD).
6. Press the power button to turn the computer "on".
System Software
Your co mputer m ay already com e with system so ftware
pre-installed. Where this is not the case, or where you are re-
configuring your computer for a dif ferent system, you will
find this manual refers to Microsoft Windows 8.1.
4
°
135

Shut Down
Note that you should always shut your computer down by
choosing the Shut down command in Windows (see be-
low). This will help prevent hard disk or system problems.
Click the icon in the Start Screen and
choose Shut down from the menu.
Or
Right-click the Start button
Screen or the Desktop and choose Shut down or sign out
> Shut down from the context menu.
Figure 1 - Opening the
Lid/LCD/Computer
with AC/DC Adapter
Plugged-In
at the bottom of the Start