Connections And Controls - Bose L1 Notice D'utilisation

English Deutsch Español Dansk

Connections and controls

Figure 2
Power stand top panel
Power/Fault LED
Indicates power status.
Blue = system on
Red = system fault
AC Mains
AC power input 
connector.
Analog Input
A line-level analog input. Accepts
a ¼" TRS phone cable. Used for
an instrument or other audio
source.
Français Deutsch Italiano Nederlands Español
The top panel of the power stand provides system connectors and controls (Figure 2).
Signal/Clip LED
Indicates status of the analog input signal.
Green = normal input
Yellow = input approaching clipping
Red = input clipping
Venice_Intro.fm
Svenska Français Italiano
Power switch
Switches the system
on and off.
Bass Module Out
Bass output signal for driving one
or two B1 bass modules. Accepts
a 4-wire bass module cable.
Trim
Adjusts the level of the
analog input signal.
4/12
Nederlands Svenska
I
NTRODUCTION
ToneMatch ® port
Digital audio and power con-
nection for the optional T1
ToneMatch audio engine. 
Accepts the included 
ToneMatch cable.
7