Safety Regulations; Important Advice - Brevi Fuego Sprint 525 Notice D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
car seat in the car, make sure that during use none of its components is blocked by any movable part of the
GB
seat or the door of the car. Adjust the height of the car seat according to the height of the child to ensure that
the belt is positioned correctly (Pics. 3, 4, 5). Check that the back of the car seat is perfectly locked to the
seat body using the appropriate fixing guide on the back. This version can be used until the weight of the
child exceeds 25 kg. After this you must use the seat-body version. In this case release the back, rotating it
and pulling it out from the appropriate fastening guide. To replace the back, repeat these operations in rever-
se order. The Fuego car seat comes complete with a seat, a back, and a headrest,and is suitable for
children weighing less than 25 kg. From 15 kg to 36 kg the "seat-body" solution is best. In this case it
is sufficient to release the back, rotating it and pulling it out from the appropriate fastening guide (Pic. 6). To
replace the back, repeat these operations in reverse order.
Warning: the car seat must never be installed on the seat of the car in the reclined position.
Place the car seat in the car so that the back of the car seat body is hard against the back of the vehicle
(Pic.7). Make sure that the strap of safetybeltretainer does not remain under the car seat. Place the child on
the car seat checking that the safety belt isn't twisted and pass the abdominal part of the belt under the arms
to restrain the child's pelvis correctly. Fasten the buckle and ensure that any slackness of the belt is taken
up by the self-rewinding mechanism. Fix the car seat with the safety belt pulled tightly. Push the webbing
retainer to the child's shoulder where the diagonal belt of the vehicle is passing. Feed the diagonal portion
of the seat belt through the seat belt retainer A (Pic.5) Pull the harness adjustment strap to pull the seat belt
away from the child's face and neck.
CLEANING THE CAR SEAT
Consult the fabric label sewn onto the product for washing instructions.
To clean the plastic parts of the car seat, simply rub them with a damp cloth.
Do not use solvents.
Protect the product from environmental elements, water, rain or snow; longer sun exposition can cause
variation in colour in many fabrics.
Keep the product in a dry place.

SAFETY REGULATIONS

No modification or addition can be made to the car seat without specific approval of qualified authorities.
Any alteration to this product may mean it will no longer function correctly and will no longer be safe.
Failure to observe these rules can cause serious danger in the use of the car seat. In these cases the
manufacturer declines all responsibility. The car seat must be secured by the safety belt even when the child
is not in it. The car seat must be replaced after an accident. The violent stresses to which it is subjected in
these cases can alter its structure and solidity, thus compromising its safety. Do not allow the car seat to get
too hot by exposing it to the sun's rays. Do not leave the child unattended in the car seat, inside the car.
When travelling, check periodically that the car seat and child are positioned correctly and that the belt is
fastened and tight. When travelling, do not leave unsecured objects or luggage inside the car. In the event
of an accident these could cause injuries.

IMPORTANT ADVICE

Follow the instructions in the order shown and become familiar with the Fuego Sprint before installing it
in your car. Failure to do so may be dangerous. Ensure that the Fuego Sprint is not damaged because of
problems with the folding seat or with the car door. Before each trip, be sure to adjust the safety belt of the
car according to the clothes the child is wearing. A belt adjusted for winter clothing, for example, will be too
loose for a child wearing summer clothes.Cover the Fuego Sprint if your car is left in the sun, since the metal
and plastic parts can cause burns when touched and the covering may bleach.
Be sure to lift the Fuego Brevi holding both the seat and the back at the same time.
Do not lift it only by the back or the headrest.
Keep the Fuego Brevi in a safe place when not in use. Do not place heavy objects on it and don't put it near
heat sources such as radiators.
Keep it locked even when not in use.
Do not use Fuego Sprint with the abdominal belt alone.
Do not use Fuego Sprint facing backwards.
Do not use Fuego Sprint in the house, only in the car.
8

Publicité

Table des Matières
loading

Table des Matières