Gima 30892 Manuel De L'utilisateur page 5

5
Specifications
Magnification
2.5x
3.5x
Environment requirements
Operation
Shipping
Storage
GIMA WARRANTY CONDITIONS
Congratulations for purchasing a GIMA product. This product meets high qualitative standards both as
regards the material and the production.
The warranty is valid for 12 months from the date of supply of GIMA.
During the period of validity of the warranty, GIMA will repair and/or replace free of charge all the defected
parts due to production reasons.
Labor costs and personnel traveling expenses and packaging not included.
All components subject to wear are not included in the warranty.
The repair or replacement performed during the warranty period shall not extend the warranty. The warran-
ty is void in the following cases: repairs performed by unauthorized personnel or with non-original spare
parts, defects caused by negligence or incorrect use. GIMA cannot be held responsible for malfunctioning
on electronic devices or software due to outside agents such as: voltage changes, electro-magnetic fields,
radio interferences, etc. The warranty is void if the above regulations are not observed and if the serial code
(if available) has been removed, cancelled or changed.
The defected products must be returned only to the dealer the product was purchased from. Products sent
to GIMA will be rejected.
To ensure precise measurement reading, re-calibration of the device is recommended after 2 years from the
date of purchase. Shipping plus handling cost and recalibration service fee shall be charged accordingly.
Working distance (mm)
340/420
340/420
Environment Temperature
Relative humidity
Atmospheric pressure
Common conveyance
Environment Temperature
Relative humidity
Atmospheric pressure
ENGLISH
Field of view dia. (mm)
+10°C – +40°C
30% – 75%
700 hPa – 1060 hPa
+10°C – +40°C
30% – 75%
700 hPa – 1060 hPa
80/90
55/60