Turn On Computer - Sonnet Crescendo PCI G3 Manuel D'installation

PCI TriManual-Chapters 1-13
En
3. Raise the assembly support stand (Figure 12)
and rotate it into place within the internal
assembly.
4. Lock the internal assembly latches into their
original position and rotate the processor cover
over the PCI slots and Crescendo card
(Figure 13).
5. Replace the case cover onto your computer
(Figure 14).
6. Return the computer to your computing area
and reconnect the power and peripheral cables
to the computer.
7. Affix the Powered by Sonnet label to the front of
your computer.

Turn On Computer

1. Turn on your Power Macintosh. Your accelerat-
ed machine should boot normally.
2. Due to resetting the CUDA switch, some
Mac OS preference files have been reset to their
default settings. You will need to reset the Date
& Time control panel as well as your preference
settings for the Mouse and Keyboard control
panels.
3. If you are installing a Crescendo/PCI G4, see
Chapter 10, "Upgrading to Mac OS 9.x and a
G4" for information about enabling AltiVec
extensions in Mac OS and application software.
Support Note:
upgraded with a G4 processor in order to
take advantage of AltiVec-enhanced applications
and software.
3/30/01 5:55 PM Page 17
Your computer must be
support
stand
Figure 12; Figura 12
processor cover
Figure 13; Figura 13
case cover
Figure 14; Figura 14
1-8