Remove Level 2 Cache Card; Reset Cuda Switch; Upgrade Card - Sonnet Crescendo PCI G3 Manuel D'installation

Table des Matières

Publicité

PCI TriManual-Chapters 1-13
En

Remove Level 2 Cache Card

If your computer contains a Level 2 cache card,
remove it. In the PowerTower it is located directly
next to the Processor Card Slot (Figure 4-Label B).
In the PowerTower Pro it is located directly next to
the Processor Card Slot (Figure 5-Label B).

Reset CUDA Switch

Reset the CUDA switch on the logic
board. In the PowerTower it is locat-
ed directly next to the L2 Cache
Card Slot (Figure 4-Label C). In
the PowerTower Pro it is located on the outer
edge of the logic board, left of the DIMMs
(Figure 5-Label C). Resetting this switch ensures
that a new upgrade card is recognized at the
next startup.
Install Crescendo/PCI Processor

Upgrade Card

1. Remove the Crescendo card from the anti-
static package, making sure to handle the card
by the edges (Figure 6). Your card may differ
from what is pictured below.
3/30/01
5:56 PM
Page 91
A
Figure 4; Figura 4
A
B
C
Figure 5; Figura 5
Crescendo card
Figure 6; Figura 6
B
C
anti-static
package
6-6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Crescendo pci g4

Table des Matières