Sonnet Crescendo PCI G3 Manuel D'installation page 29

PCI TriManual-Chapters 1-13
En
4. Identify the internal components of your com-
puter. Touch the power supply metal shielding
(Figure 2) to discharge any potential damaging
static electricity, and rotate the plastic processor
cover up and to the left (Figure 2).
5. Release the two latches (Figure 3) that lock the
internal assembly for the drive bay and power
supply in place.
6. Lower the assembly support stand (Figure 4).
7. Rotate the internal assembly out of the case
(Figure 5). The support latch should lower and
lock in place.
Support Note:
support latch when you close the internal
assembly because it will easily break.
3/30/01 5:55 PM Page 11
Remember to lift the
power supply
metal shielding
processor cover
Figure 2; Figura 2
internal assembly
Figure 3; Figura 3
Figure 4; Figura 4
lower support latch (located
underneath assembly)
Figure 5; Figura 5
support
stand
1-5