Remove Processor Card; Remove Level 2 Cache Card; Reset Cuda Switch - Sonnet Crescendo PCI G3 Manuel D'installation

PCI TriManual-Chapters 1-13
En

Remove Processor Card

Remove the current processor card from the
Processor Card Slot (Figure 6) and set it aside.
Be careful! The metal heatsink on the processor
card can get extremely hot if it has not been given
sufficient time to cool.

Remove Level 2 Cache Card

If your computer contains a Level 2 cache card,
remove it. If you are uncertain about whether you
have a Level 2 cache card, or where it might be
located, consult your computer's documentation or
see Chapter 12, "Removing a Level 2 Cache Card."

Reset CUDA Switch

Reset the CUDA switch on the logic board
(Figure 7). It is located directly inline with the
Processor Card Slot. Resetting this switch ensures
that a new upgrade card is recognized at the
next startup.
3/30/01 5:55 PM Page 13
processor card
Processor Card Slot
Figure 6; Figura 6
Processor Card Slot
CUDA switch
PCI slot
Figure 7; Figura 7
1-6