7.5 Spacers
7.6 Levelling
7.7 Door reversibility
4
3
2
1
Install the spacers provided within the
accessory bag on the back side of the
panel.
When placing the appliance ensure that
it stands level. If necessary adjust the
feet using the adjustment spanner sup-
plied.
Door alignment is dependent on proper
levelling.
To change the opening direction of the
door, do these steps:
• Remove the plug from the power.
• Remove the ventilation grille. Remove
the filling and install it on the opposite
side of the grille.
• Lay down the appliance back side
down on a wooden support.
• Unscrew the lower hinge.
• Remove the door closure device from
the hinge and move the pin to the
other side. Re-screw the door closure
device provided within the accessory
bag on the opposite side.
ENGLISH
33