Accessories - HumanTechnik PL-51 Mode D'emploi

Setting the volume / tone
Set the volume control to low before picking up the telephone and adjust the
high/low tone control to medium. Now the volume can be adjusted to your
needs with the volume control. The high/low tone control can be used to
alter the tone by amplifying high and low tones.
Furthermore the output volume can be doubled by pressing the amplifier
booster button. The set volume is increased when the amplifier button is
pressed down and held. The button must be disengaged while talking.
Switch off
The hearing amplifier switches off automatically approx. 30 seconds after
the receiver is placed back on the hook. The green light turns off.
Connection possibilities
The following optional accessories can be connected to the 3.5 mm socket of
the PL-51:
• Small headphones: e.g. walkman headphones
• Hearing aid users can connect a neck loop to the jack socket. The hearing
aids have to be switched to „T" or „MT". The volume can be adjusted
with the volume control on the PL-51.
• Hearing aids with audio shoe can be connected to the PL-51 with the
audio cable monaural (for people wearing one hearing aid) or binaural
(for people wearing hearing aids in both ears)
Please note that the loudspeaker of the handset is turned off when the jack
socket is used. (Avoidance of feedback).

Accessories

• Neck loop, order no. A-4921-0
• Audio cable monaural, order no. A-4940-0
• Audio cable binaural, order no. A-4950-0
• Stethoscope headset DIR, order no. A-4903-0
• Lightweight stethoscope headset, order no. A-4902-0
• Headphone, order no. A-4905-0
• Earphone A-4904-0
10 English