Reversing The Refrigerator Door - Samsung RR35H6165SS/WS Manuel D'utilisation

REVERSING THE REFRIGERATOR
DOOR
Samsung recommends that reversing of
the door opening is only completed by
WARNING
Samsung approved Service providers.
This will be on a chargeable basis and at
the customers expense.
Any damage caused while attempting to
reverse the door opening is not covered
under the appliance manufactures
warranty.
Any repairs requested due to this
circumstance will be completed on
a chargeable basis at the customers
expense.
Required Tools (Not provided)
Phillips Head Flat Head Driver
Driver (+)
8 mm Socket
Wrench
(for hinge shaft)
(for bolts)
1. Remove 4 screws on the top of the refrigerator.
DA68-03008G-02.indb 13
10 mm Socket
Wrench
(-)
(for bolts)
5 mm Hex
Spanner Wrench
(for bottom hinge
shaft)
English - 13
2. Remove the plastic cover and make sure to
disconnect the wire connected to it.
After removing the plastic cover, check the
parts for reversing the door.
Be careful not to damage the electrical
wires when removing the plastic cover.
CAUTION
3. Disconnect the wires and then remove 3 bolts.
Make sure your refrigerator is unplugged
before handling electrical wires.
WARNING
4. Remove the door from the lower hinge by
carefully lifting the door straight up.
Refrigerator door is heavy, be careful
not to injure yourself when removing the
WARNING
refrigerator door.
14. 8. 9. 11:45