setting up your refrigerator
REVERSING THE REFRIGERATOR DOOR
Before you reverse the refrigerator door, make sure to unplug the refrigerator.
If this operation is not performed by After sales service, it is not covered by the
WARNING
warranty.
Required Tools
Phillips Head Driver (+)
1. Remove the Hinge cover on th top of the Fridge door with flat head driver.
2. Remove 2 screws on the Top front cover of the refrigerator.
12_
setting up
DA99-03236K (XMA).indb
Not provided
Flat Head
Driver (-)
12
11mm Wrench
(for hinge shaft)
(for middle hinge)
3/16"
Allen Wrench
2010.5.31
1:48:14 PM