SEVERIN SM 3584 Mode D'emploi page 12

∙ Caution: Keep any packaging materials
well away from children – such materials
are a potential source of danger, e.g. of
suffocation.
∙ Every time the appliance is used, the
main body including the power cord as
well as any attachment fitted should
be checked thoroughly for any defects.
Should the appliance, for instance, have
been dropped onto a hard surface, or if
excessive force has been used to pull
the power cord, it must no longer be
used: even invisible damage may have
adverse effects on the operational safety
of the appliance.
∙ This appliance is solely designed for
heating up and frothing milk. Do not put
any other type of liquid or solid food in
the container.
∙ Do not leave the milk frother unattended
while in use.
∙ Always observe the min and max level
marks inside the container for each
application. If there is not enough milk,
the appliance may overheat.
∙ To prevent such overheating, the
appliance will automatically switch off if
it is operated when empty, or containing
too little milk. This is indicated by the
light ring flashing alternately blue and
red.
∙ Overfilling the container may cause
danger if frothing milk is forced out.
∙ Caution: The lid must always be fitted
during operation.
∙ The appliance may only be used with
the original accessory parts provided by
the manufacturer.
12
∙ The appliance must always be set on a
firm, level surface.
∙ Do not allow the appliance or its power
cord to come into contact with open
flames or any hot surfaces such as hot-
plates.
∙ Do not allow the power cord to hang
free; the cord must be kept well away
from hot parts of the appliance.
∙ Always remove the plug from the wall
socket
- in case of any malfunction,
- after use,
- before cleaning the appliance.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ No responsibility is accepted if damage
results from improper use, or if these
instructions are not complied with.
Before using for the first time
∙ Remove any remaining packaging
materials and promotional stickers, and
check that all components are present.
∙ Before the appliance is used for the
first time, or after extended periods of
non-use, it should be thoroughly cleaned
as described in the section Cleaning and
care.