Dimensional Drawings; Technical Data; Plug And Socket Ghg 525 - Cooper Crouse-Hinds GHG 525 45 Mode D'emploi

Dimensions in mm
X = fixing dimensions
Flange socket
Inlet, 5- pole
Inlet, 4- pole
Plug, 5- pole
Plug, 4- pole
Drilling template for inlets
Plug and socket system 125A, GHG 525
1

Technical data

1.1 1.1

Plug and socket GHG 525

Plug and socket GHG 525
1.1 1.1 1.1 Plug and socket GHG 525 Plug and socket GHG 525 Plug and socket GHG 525
Rated voltage:
Rated current:
Back-up fuse:
Switching capacity wall socket with switch:
AC 22
AC 23
Perm. storage temperature in original packing:
Protection category acc. to EN/IEC 60529
with closed and secured hinged cover as well
as combinations properly plugged together:
Insulation class acc. to EN/IEC 60598:
Cable entries:
Wall socket with switch
Plug / Coupler
Supply terminal:
Wall socket with switch
Plug
Flange socket / Coupler
Pilot contact
Test torques:
Cap nut of the M63 entry
Cover screws
Terminals
Self-cutting screws size 4
Self-cutting screws size 5
Switch connection screw
Weight: (catalogue version)
Wall socket with switch
Plug
Flange socket
Inlet
Coupler
Drilling template for flange sockets
up to 690 V, 50/60 Hz
max. 125A
max. 125A
up to
-55°C to +80°C
IP 66 (catalogue version)
I - is complied with by the devices
(catalogue version)
1x M63 (Ø 35-46mm) +1 x blanking plug M63
Ø 31-58mm
Cross section
1 x 10 - 70 mm²
1 x 4.00 - 35 mm²
with pin cable lug 1x 50 mm²
1 x 16 - 70 mm²
1x 2.5 - 4.00 mm²
5.0 Nm
2.5 Nm
4.5 Nm
2.0 Nm
3.0 Nm
6.0 Nm
GHG 525 4. approx.
GHG 525 7. approx.
GHG 525 8. approx.
GHG 525 9. approx.
GHG 525 3. approx.
Wall socket with switch
Cooper Crouse-Hinds GmbH
415V 500V 690
125 A 125 A 125 A
90 A 70 A 50 A
Stripped wire length
18 mm
13 mm
16 mm
10 mm
4-pole 5-pole
8.50 kg 5.60 kg
1.30 kg 1.40 kg
1.40 kg 1.50 kg
0.90 kg 1.00 kg
2.00 kg 2.10 kg
Coupler
7 7 7 7 7