Heating Your Room; Heating Modes - When To Use Them - Thermor R4GHD-T2S Notice D'installation Et D'utilisation

4 - Heating Your Room

What you want to do
Start the radiator
Activate the screen in
standby mode

5 - Heating Modes - When to Use Them

5.1 - Choosing Your Heating Mode
The first time your device warms up, a slight odor may be noticed. This is due to the elimination of residue left
during radiator manufacturing and disappears after a few moments in operation.
Pictogram Designation
Comfort
Eco
Freeze
?
Protection
PROG Programming
Comfort -1
Comfort -2
5.1.1 - Using Comfort Mode
What you want to do
Chose your COMFORT
heating mode
Change the temperature set
for COMFORT mode.
5.1.2 - Using Eco Mode
What you want to do
Choose the ECO heating
Mode.
What you need to do so
Press and hold the
Press any key
When to Use This Mode
You are home.
You are absent for 2 to 48 hours or you are sleeping.
You are absent for more than 48 hours or during summer. The
Freeze Protection temperature is set at approximately 7°C and
may not be changed.
If you want your device to follow a scheduler's orders (recorded
program). You will have alternating Comfort and Eco modes
at the times you have specified. Consult Chapter 6 for more
detailed explanations.
These heating modes are only accessible when a power manager
is present in your installation.
What you need to do so
Press the and keys.
Stop on the mode
Validate with the
Press the and
Stop on the desired temperature and
validate with the
What you need to do so
Press the and keys.
Stop at the Eco mode
with .
What will happen
When the radiator is used for the first
time, the screen lights up and indicates
the Comfort mode (
keys.
default. On restart, the screen displays
the temperature and mode in use before
the radiator was switched off.
The screen displays the current mode
and associated temperature. When first
used the device is in comfort mode
and the temperature is set at 19°C.
What will happen
The cursor
mode.
.
Only the chosen mode is displayed
keys.
with the corresponding temperature.
The temperature moves in increments
keys.
of 0.5°C and flashes.
The new temperature chosen is
displayed.
keys.
What will happen
The cursor
Modes and flashes.
Only Eco mode
and validate
displayed with the corresponding set
temperature.
) temperature by
flashes under
moves under the
remains