Using This Guide; Intended Use - ResMed AirFit F20 Mode D'emploi

ENGLISH
Full face mask
Thank you for choosing the AirFit
identical—except for the interchangeable AirFit F20 silicone cushion and
AirTouch F20 foam cushion. This offers two choices for your mask,
depending on your preferred comfort, stability and seal.
This document provides the user instructions for:
™
• AirFit
F20/AirFit
™
• AirTouch
F20/AirTouch
These masks are referred to collectively as F20 throughout this manual.
These masks may not be available in all countries.

Using this guide

Please read the entire guide before use. When following instructions,
refer to the images at the front of the guide.

Intended use

The F20 is a non-invasive accessory used for channeling airflow (with or
without supplemental oxygen) to a patient from a positive airway
pressure (PAP) device such as a continuous positive airway pressure
(CPAP) or bilevel system.
The F20 is:
• to be used by patients weighing more than 66 lb (30 kg) for whom
positive airway pressure therapy has been prescribed
• intended for single-patient reuse in the home environment and multi-
patient reuse in the hospital/institutional environment.
AirTouch F20 cushion
The cushion is intended for single-patient reuse in both home and
hospital/institutional environments and recommended to be replaced
monthly.
™
F20/AirTouch
™
F20 for Her
™
F20 for Her
™
F20. These masks are
English 1