Setup Menu - Bushnell X-8 TRAIL CAM Manuel D'instructions

SETUP MENU: Items/Settings/Description
The following table lists all of the menu items, their available settings,
and a description of their functions:
Menu Item
T- Lapse
(Time Lapse
mode
settings)
10
Settings
(Bold=default)
T-Delay time,
Duty (Start and
Stop times)
Description/Operation
Press Ok-"T-Delay" will flash.
Set the T-Delay time from 1-60
Minutes, using the Up/Down
buttons. The T-Delay parameter
sets how often photos or videos
are captured during the "Duty"
interval. Press Ok-the display will
flash "Duty". Use Up/Down to
set the start hour (24 hr format,
from 00:00 to 23.00 hours). Press
Ok and use Up/Down to set the
start minute (:00-:59). Press Ok
and repeat the process to set the
stop hour and minute. The Duty
settings determine the "window"
or block of time when photos/
videos will be captured, without
requiring a PIR trigger from a
live animal. Example: T-Lapse
operation (Duty cycle) from
5:30AM to 8:00AM, at 7 minute
intervals. NOTE: if you don't
want the camera to operate in
Time Lapse mode, be sure that
the T-Delay time is set to "OFF".