Injection Hose Connection; Suction Hose Connection - Mareva Premium pH Manuel D'installation Et D'entretien

3.8 Injection hose connection

- Cut 30 cm of PVC 4x6 hose
- Connect one end of the hose to the pump right hand side connection.
- Connect the other hose end to the electrode holder side-entrance.

3.9 Suction hose connection

- Cut the needed length of PVC 4x6 hose in order to reach the bottom of your tank from the left hand
side pump connection.
- Connect the suction hose end to the suction filter, that will be then introduced into the tank
- Connect the other end to the left hand side pump connection.
Hose assembly to the connection.
18