Dosing Pump Installation To The Electrode Holder; Connection Of The Dosing Pump Plug To The Socket 230 Vac; Electrode Protection Removal; Electrode Installation Procedure - Mareva Premium pH Manuel D'installation Et D'entretien

3.4 Dosing pump installation to the electrode holder

(For wall installation use the wall bracket and screws with dowel).

3.5 Connection of the Dosing pump plug to the socket 230 Vac

Warning!
At this stage, if the setting up of the installation is not correct, or if the potentiometer position have
been modified, proceed as per point (6.0), and points from (9.0) to (9.3)

3.6 Electrode protection removal

- Remove the cap

3.7 Electrode installation procedure

- Introduce the two sealing O.rings on the electrode
- Introduce the fixing ring nut on the electrode cable
- Introduce the electrode into the holder
- Fix the ring nut by hand (do not use tools).
-
17