1- Insert - DANUBE WED 8 Instructions Pour L'installation, L'utilisation Et La Maintenance

With the INC (∧) and DEC (∨) keys the title is selected. Next on pressing ENTER, the
new title is selected. If on the other hand ADVANCE is pressed, the phase number, its
name and block number associated to this phase will be displayed.
With the INC (∧) and DEC (∨) keys, the phase number will be increased or decreased.
Once the phase number has been selected to introduce the new block, press ENTER.
7.3.1 INSERT
This command allows for a phase to be inserted in a programme. The steps to follow are
the following:
After selecting INSERT, press ENTER and the first phase will be displayed with its
name.
With the INC (∧) and DEC (∨) keys, the phase name can be chosen amongst those saved
in the memory. Once this name has been selected, press ENTER and the name of the first
available block will be displayed:
Phase:
Pre-wash
Block:
Text: Wash 90 ºC
INSERT
CHANGE
REMOVE
Programme
BLANKETS
Phase:
Pre-wash
Phase:
Wash
Block:
Text: Pre-wash 90 ºC
54
1
35
21
1
1
7