Error Messages - DANUBE WED 8 Instructions Pour L'installation, L'utilisation Et La Maintenance

2.7.- Error messages

On the washing machine screen, warning or fault messages can be displayed during or
after the execution of a wash programme. Except in the event of a power cut-off, the washing
machine will be paused (drainage valve off, motor off, etc.) waiting for the user to intervene.
The messages shown are explained below:
Power cut-off
Message:
Meaning:
Options:
Electrical fault in the door closing system
Message:
Meaning:
Options:
Electrical fault in the door closing system
Message:
Meaning:
Options:
"POWER FAILURE"
This message appears on recovering the voltage after having been cut-
off.
- Press ENTER: the programme continues to operate in the same phase
as before the power cut-off.
- Press ESC: programme ends.
ALARM E1
"FAULT CLOSING"
This message appears when the door is detected to not having been
closed during the execution of a programme.
- Press ENTER: the programme continues to operate.
- Press ESC: programme ends.
ALARM E2
"FAULT LOCK"
This message appears when it is detected that it has not been possible to
lock the door before starting the programme or if it becomes unlocked
during the programme
- Press ESC: programme ends.
25