Programme Selection; Washing Programmes - DANUBE WED 8 Instructions Pour L'installation, L'utilisation Et La Maintenance

2.2.-Programme selection

When the washing turns on, the last programme carried out appears on the screen,
indicating its number and name, as well as its main characteristics. For example, if programme
number one is selected:
The first line on the screen indicates the programme number (P1) and its name
(WHITES/COLOUREDS 90 ºC). The first phase of the programme appears in the following
rows, in this case a pre-wash, the programmed water temperature for this phase (40 ºC) and a
message indicating how to turn the washing machine on.

2.3.-Washing programmes

These are the washing machine's 16 fixed programmes:
1.- Whites 90 ºC
2.- Whites/coloureds 60 ºC
3.- Whites/coloureds 40 ºC
4.- Whites/coloureds 30 ºC
5.- Whites/coloureds Cold
6.- Synthetics 60 ºC
7.- Synthetics 40 ºC
8.- Synthetics 30 ºC
9.- Synthetics Cold
10.- Delicates 40 ºC
11.- Delicates 30 ºC
12.- Delicates Cold
13.- Woollens 30 ºC
14.- Cold woollens
15.- Fast spin
16.- Medium spin
However, these models also have the possibility to programme up to a maximum of 83
programmes, numbered from 17 to 99. To select one of these programmes, the same as for any
fixed programme, either the INC (∧) or DEC (∨) key should be pressed. Each time that these
keys are pressed, the programme number increases or decreases, respectively, by one, and the
programme is displayed on the screen.
P1:WHITES
Pre-wash
Temperature:
START to commence
18
90 ºC
40 ºC