Creating A Wash Programme; Program Name - DANUBE WED 8 Instructions Pour L'installation, L'utilisation Et La Maintenance

2. CREATION OF A WASH PROGRAMME
A wash programme is made up of a programme name (name) plus a group of phases
ranging from one to a maximum of 15. Each phase has a name plus a block, which is a structure
of 30 parameters that the user can programme and change as he wants, depending on his special
needs.
Example:
Name Phase 1
Example: Pre-wash
Block number
Up to 99 different programmes can be programmed. Nevertheless, it should be taken into
account that programmes 1 to 16 are fixed, that is to say, they can not be modified nor erased.
Therefore, new programmes created should be recorded between 17 and 99. In the same way, the
possibility exists to programme up to 120 blocks, 34 of which are fixed and cannot be modified
nor erased.
The programme name (name) as well as the name of the phase consists of a maximum of
15 characters. The following characters can be used:
A to Z, a to z, 0 to 9, blank space, $, %, /, (, ), =, ?, +, -, _ , >, <

PROGRAM NAME

Example: Delicates 40 ºC
Name Phase 2
Example: Wash
Block number
39
Name Phase 3
Example: Spin
Block number