Maxx-world 42801A0 Mode D'emploi page 18

EN
10. Serve the food you prepared directly or select a suitable lid (shaker lid, to-go lid or
storage lid) and screw it onto the blending container.
11. Clean the accessories immediately after each use to prevent the formation of germs
(see chapter "Cleaning and storage"). Do not allow any residual food to dry onto it.
3. Select a blade adapter (see chapter "Accessories") and screw it
onto the blending container in a clockwise direction. NOTICE: A
gasket is fi tted in the plastic casing of the blade adapter. This
gasket ensures that the blending container does not leak while
processing food. Each time before you use the device, make
sure that the gasket is properly inserted in the groove.
4. Turn the blending container upside down and place the blade
adapter in the motor unit. The 3 catches on the blending contain-
er must be inserted in the corresponding recesses in the motor
unit for this.
5. Connect the mains plug to a properly installed, easily accessible
socket.
6. To turn the device on, hold the motor unit fi rmly with one hand
and turn the blending container clockwise with the other hand
until it locks into place. NOTICE: Use the device continuously
for no more than 1 minute without stopping to prevent it from
overheating.
7. To switch the device off, turn the blending container counter-
clockwise up to the stop.
8. Wait until the blades have come to a complete stop. Then re-
move the blending container.
9. Turn the blending container over and screw the blade adapter
off.
18