Replacing The Batteries; Cleaning And Maintenance - Philips Satinelle Prestige HP6583 Mode D'emploi

Masquer les pouces Voir aussi pour Satinelle Prestige HP6583:
Table des Matières

Publicité

Replacing the batteries

1
Open the battery and light compartment by turning the bottom
anticlockwise with a coin.
2
Remove the old button batteries.
Keep the button batteries out of the reach of children and pets.
Button batteries present a potential choking hazard.
3
Insert the new button batteries with the negative side pointing
forward into the battery and light compartment.
Note: The Smart Tweezers work on three alkaline button batteries,
type L736H or AG3 (dia. 7.8 x 3.4 mm).
4
Screw the bottom back onto the battery and light compartment by
turning it clockwise with a coin.

Cleaning and maintenance

Never use scouring pads, abrasive cleaning agents or aggressive liquids
such as petrol or acetone to clean the appliance.
Always keep the adapter dry. Never rinse it under the tap or immerse
it in water. If necessary, clean the adapter with the cleaning brush or a
dry cloth.
Cleaning the epilator and attachments
Clean the epilating head after each wet use to ensure optimum
performance.
Always switch off the appliance before you clean it.
1
Switch off the appliance.
2
Remove the cap from the epilating head.
3
Press the release button (1) and remove the epilating head from
the appliance (2).
Note: Never try to detach the epilating discs from the epilating head.
ENGLISH
15

Publicité

Table des Matières
loading

Table des Matières