Bresser 5x42 Night Vision Mode D'emploi page 17

Taking a film
The film recording is started by pressing the recording knob; pressing
this same button again to stop the recording. During film recording, the
record symbol flashes on the top of the display next to the film camera
symbol and the running recording time is displayed above likewise.
The resolution of the film images is 768 x 582 pixels.
d e F c
1. Battery charge
2. SD card status
3. Video mode
4. Recording status
5. Recording time
b
Connection to a computer
ATTENTION! Never disconnect an existing data connection to the
computer before you transfer all the data. An interruption can lead
to data loss. The Mini USB connection enables you to connect the
night vision device to a computer via a mini-USB cable *, allowing you
to transfer images or videos on this or to view them as an enlarged
image/video on the screen. The computer recognizes the night vision
device as an external storage device normally and allows access to the
data of the inserted SD card *. As long as a USB cable * is attached
and connected to the computer, the preview screen of the night vision
device shows a blue screen and the text "USB". If the night vision device
is successfully connected to the computer, follow the instructions of
the operating system to access the data. This function is also available
without a separate power supply of the night vision device.
* not included in delivery
DE
GB
FR
ES
RU
IT
17