Bresser 5x42 Night Vision Mode D'emploi page 15

Once the illuminator is switched on, viewing in complete darkness is
possible.
4. Batteries (6 pcs. type AA) are not included. The viewing time amounts
to about 6 hours when the infrared illuminator is switched off. When the
infrared illuminator is switched on, it's about 4 hours.
5. In total darkness, the detection range is about 200 m. when the
infrared illuminator is switched on.
Operation
Set up the device on an object that is about 20-30m away.
Look into the eyepiece (3) and turn this until the display is clearly visible.
Adjust by rotating the lens (2) to focus on a clear image of the object.
If you change the viewing distance you will reach a high-quality image
solely by turning the lens (2). Another rotation of the eyepiece (3) is not
necessary, your device is individually set for you.
Use of a micro SD memory card*
To save images or videos, you need an SD memory card up to 32GB*.
Slide the micro SD memory card into the micro SD card slot (13) until it
locks into place with a soft click.For removing the micro SD card, press
the card in the slot just once briefly. This jumps out of the compartment
with a soft click and can be taken out.
*not included with delivery
Multifunction button (2 functions):
• Switch on
• Switch off
Switch on: If the device is switched off, it can be switched back on
by briefly holding down the button. The status LED lights up blue when
switched on.
Switch off: The switched on device can be switched off by briefly holding
down the button.
DE
GB
FR
ES
RU
IT
15