Bresser 5x42 Night Vision Mode D'emploi page 16

+
Multifunction button (2 functions):
• Switch on the infrared illuminator
• Increase the light intensity of the illuminator
Increase the light intensity of the illuminator: When the infrared
illuminator is switched off, it can be switched back on again with a single
press of the button. When the infrared illuminator is switched on, the
light intensity is increased, until it reaches 100%, with each press of the
button. If the maximum output is reached, a further press has no effect.
Multifunction button (2 functions):
• Switch on the infrared illuminator
• Decrease the light intensity of the illuminator
Decrease the light intensity of the illuminator: When the infrared
illuminator is switched on, the light intensity of the infrared illuminator
is decreased, with a single press, until the infrared illuminator is
switched off. A further press has no effect.
16
Taking photos
By pressing the photoshot button, you will take a picture of the live image,
which is then stored. The resolution of the photo image is 768 x 582
pixels.
d e c
1. Battery charge
2. SD card status
3. Photo mode
4. Number of images available
b