dirna Bergstrom TRP SLIMCOOL Manuel De L'utilisateur page 11

SLIMCOOL
Function F1 - Digital thermometer function
By selecting this function, SlimCool displays temperature inside cabin.
Function F2 - Time programming function
F2
programs the equipment so that it is automatically disconnected during a 1-9 hour period.
In order to program, push the On/off key
time using the keys
Function F6 - ºF Selection
To activate this function, keep the On/Off
and then release the key to directly enable ºF. To return to ºC, keep the control panel
pressed down with the unit switched off, at which point
flashing, release the control panel
out this operation, meaning it must be activated again once finished.
-
+
and confirm by pushing On/off
+
F2
until is shown on display, select functioning
key pressed down until the display shows
key. The remote control is disabled when carrying
11
.
C
will flash; when it stops
EN
®
F6 ,
-
key