Leviton HDF3168 Mode D'emploi page 29

Figure 22
6. Route trunk breakout legs to the correct deck and tray.
7. Shown here is an example of a 48-strand trunk cable being placed into trays A and B of the target
deck.
REPEAT ROUTING
FOR NEXT TRUNK
LEG "C" and "D"
LEG "A" and "B"
8. Repeat the previous step for each trunk being routed to the target deck.
9. Once all cabling is placed in the Rear Routing Guide, patch the trunk assemblies to the target
cassette or adapter plate.
The following diagrams identify the patching order of 48-strand and 72 strand trunks in common
configurations. (Figures 23 to 25).
DI-000-F3168-20B
Leviton HDF3168 Fiber Distribution System User Guide
TRUNK 1
LEG "C" and "D"
LEG "A" and "B"
29