Installing An Optional Trunk Mounting Clamp Kit - Leviton HDF3168 Mode D'emploi

Figure 25
5.2

Installing an optional Trunk Mounting Clamp Kit

When utilizing Ultra-High density applications to a deck, additional trunk clamping capability may be
necessary. Install an HDF3168 Cable Clamp Kit by following these steps:
1. Determine the correct cable grommet for the installation.
2. A cable clamp kit containing a single axis grommet with an outside diameter of 0.325 to 1.125
inches is supplied with each deck. Multiple cables can be secured using the single axis grommet.
If cables smaller than 0.325 are used the multi-axis grommet can be used to secure up to 7
cables (sold separately).
DI-000-F3168-20B
Leviton HDF3168 Fiber Distribution System User Guide
Optional Cable Clamp Kit Example of a fully populated Cable Clamp
31