Leviton HDF3168 Mode D'emploi page 17

Notice: When migrating, close analysis and attention must be made to match the existing polarity
method and breakout types. Mixing polarity methods will cause collision and connectivity
issues when mating cassettes and performing patching.
The Leviton High Density HDF3168 MDA Frame can be modified by adding the following components:
Patch Deck – Part Number:

#F3168-DCK
Splice Deck – Part Number:

#F3168-SPD
High Density cassettes – Multiple configurations and polarity methods available:

HDX MTP to LC 12-strand cassette OM3, Method C #31LM1-CNN
Multiple options are available for MTP to LC and MTP to MTP cassette configurations through Leviton's
online configurators at www.leviton.com/mto. For more information contact us at
call 1.800.824.3005.

Blank Plate # 5FUHD-BLK
High Density adapter plates – Part Number:

HDX Adapter Plate Loaded with 6 MTP adapters, key up/key up #5FUHD-6MB

HDX Adapter Plate Loaded with 6 MTP adapters, key up/key down #5FUHD-6MP

HDX Adapter Plate Loaded with 3 Quad LC adapters OM3/4 #5FUHD-2QL

HDX Adapter Plate Loaded with 3 Quad LC adapters OM1/2 #5FUHD-2IL

HDX Adapter Plate Loaded with 3 Quad LC adapters OS1/2 #5FUHD-2LL

HDX Adapter Plate Loaded with 3 Duplex SC adapters OM3/4 #5FUHD-6QC

HDX Adapter Plate Loaded with 3 Duplex SC adapters OM1/2#5FUHD-6IC

HDX Adapter Plate Loaded with 3 Duplex SC adapters OS1/2 #5FUHD-6QLC
Tip: The Leviton HDF3168 MDA Frame system is compatible with all High Density HDX System
cassettes, adapter plates and blanks.
DI-000-F3168-20B
Leviton HDF3168 Fiber Distribution System User Guide
appeng@leviton.com or
17