Backlight; Contrast; Brightness; Screen (Analog Rgb Signal Only) - Sony SDM-P82 Mode D'emploi

x Resetting the adjustments to the default
settings
You can reset the adjustments using the RESET menu. For more
information about resetting the adjustments, see "0 (RESET)"
on page 16.

BACKLIGHT

If the screen is too bright, adjust the backlight and make the screen
easier to see.
Note
The backlight cannot be adjusted when the ECO mode is set to "ON"
(page 17).
B A C K L G H T
1 2 8 0
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select
and press the OK button.
The BACKLIGHT menu appears on the screen.
3 Press the M/m buttons to adjust the desired light
level.

CONTRAST

Adjust the picture contrast.
C O N T R A S T
1 2 8 0
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select 6 (CONTRAST) and
press the OK button.
The CONTRAST menu appears on the screen.
3 Press the M/m buttons to adjust the contrast.
12
I
1 0 0
x 1 0 2 4 / 6 0 H z
E X I T
(BACKLIGHT)
1 0 0
x 1 0 2 4 / 6 0 H z
E X I T

BRIGHTNESS

Adjust the picture brightness (black level).
B R G H T N E S S I
1 2 8 0
1 Press the MENU button.
The main menu appears on the screen.
2 Press the M/m buttons to select 8 (BRIGHTNESS)
and press the OK button.
The BRIGHTNESS menu appears on the screen.
3 Press the M/m buttons to adjust the brightness.
SCREEN
(analog RGB signal only)
Note
When receiving digital RGB signals from the DVI-D input connector
for INPUT1, adjustment is unnecessary.
x Automatic picture quality adjustment
function
When the monitor receives an input signal, it
automatically adjusts the picture's position and
sharpness (phase/pitch), and ensures that a clear
picture appears on the screen (page 17).
Note
While the automatic picture quality adjustment function is activated, only
the 1 (power) switch will operate.
If the automatic picture quality adjustment function of
this monitor seems to not completely adjust the picture
By pressing the AUTO button, you can make further automatic
adjustment of the picture quality for the current input signal
(page 5).
If you still need to make further adjustments to the
picture quality
You can manually adjust the picture's sharpness (phase/pitch) and
position (horizontal/vertical position).
If you need to eliminate a shift of the picture occurring
when the input signal has been changed
The shift is caused by the automatic picture quality adjustment
function. You can deactivate this function (page 14).
1 0 0
x 1 0 2 4 / 6 0 H z
E X I T