White Balance - Velleman CAMCOLD 23 Notice D'emploi

• AGC: set the AGC between 6 and 44.8 dB.
7.3

White balance

Use this menu options to define the white balance adjustment.
Display: WHITE BAL
ATW ATW = auto-tracking white balance. White balance
makes sure that white objects are always reproduced
correctly. The ATW option controls the automatic white
balance adjustments. For most environments, the default
settings are sufficient.
• SPEED: controls how fast the camera will adjust the
• DELAY CNT: specifies how often the camera checks
• ATW FRAME: sets the frame magnification for the
• ENVIRONMENT: choose INDOOR for indoor
PUSH This is a fixed setting.
USER1 These are two user-definable setting that let you control
USER2 red and blue gain. This can be useful in environments
that are saturated with a single colour of light (for
example bars or entertainment venues), or it can help
vision-impaired (colour-blind) users.
ANTI CR Anti colour rolling. Some types of lighting can cause
colour bars rolling over the screen. Use this setting to
compensate.
V. 01 – 08/05/2012
CAMCOLD23
to capture fast moving objects with less motions blur.
white balance. The higher the setting, the faster the
adjustment.
Note: a too fast adjustment can result in colour
oscillation.
for colour changes and apply the ATW settings. The
lower the number, the more frequent the checks and
adjustments.
camera to identify the colour changes. (Recommended
setting is 1.0.)
environments, and OUTDOOR for outdoor
environments.
7 ©Velleman nv