Carat P-3500 Série Mode D'emploi page 28

GB
Technical Data
Power Supply:
Power Rating:
Type of operation allowed:
INTERMITTENT - SERVICE S6 40%
40%
60%
Rotation Speed:
Capacitor:
Amperometric Circuit Breaker:
Thermal Circuit Breaker:
IP Level:
P-3506 P-3508
Operating weight
75 Kg 80 Kg
Tank Capacity
19/25 Lt 21/32 Lt
RECOMMENDED USE
Water-cooled tool: DIAMOND TIPPED DISC
CONTINUOUS CROWN:
ceramics, marble, grès, single-fired tiles
LASER/SECTORS (narrow slots maximum 5mm)
concrete, natural stone, granite, abrasive materials
TURBO:
concrete, natural stone, granite, refractories
THE PAIRING, TOOL/MATERIAL TO BE CUT, IS
ONLY INDICATIVE.
ALWAYS APPLY
INSTRUCTIONS SUPPLIED
MANUFACTURER, BEFORE EACH APPLICATION.
Max tool diameter:
Tool hole:
Max cutting depth:
90° cut:
90° cut in two strokes:
45° cut:
230V 50Hz~
2,2 Kw
operating under load
running freely
2800 min
30 µF 400 Vac
140°C
P-3510 P-3512 P-3515
83 Kg 86 Kg 92 Kg
(min/max)
22/34 Lt 23/35 Lt 25/38 Lt
THE OPERATING
BY THE
Ø350 mm
25,4 mm
110 mm
180 mm
80 mm
P-3506
550 mm
Water circulation pump:
Machine dimensions:
P-3506
-1
P-3508
P-3510
16A
P-3512
P-3515
54
Under working conditions, the machine has a
noise emission above 85 dB (A).
1. Use
WARNING !
Read the safety section carefully before using
this machine.
Each machine is subjected to a series of tests
and carefully checked before leaving our
factory.
Carat Centrale B.V. is constantly striving to
develop their machines and therefore reserves
the right to change such machines. No claims
may therefore be made on the basis of the data
and illustrations contained in this manual.
The masonry saws P-3500 is a technologically
advanced machine that is suitable for cutting
ceramics, marble, granite, bricks, concrete items
TOOL
and similar materials. It can also be used square to
the surface or at 45° (jolly).
2. Precautions
• The manufacturer accepts no responsibility
where the P-3500 cutter is used with any tools
other
"RECOMMENDED USE" paragraph;
28
P-3508 P-3510 P-3512
Max cutting length
850 mm 1000 mm 1200 mm 1500 mm
770 x 1280 x h. 1350 mm
770 x 1580 x h. 1350 mm
770 x 1730 x h. 1350 mm
770 x 1930 x h. 1350 mm
770 x 2230 x h. 1350 mm
than those specified
P-3515
S3 230V 50Hz
in the