Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Sigfox BREATH - Guide utilisateur / User guide version V1.0.0
Procedure to follow to program its registers according to the chosen mode:
Periodic
I want to save the data
every X seconds
I configure X in the
S320 register
I want a periodical
transmission
I configure activate the
periodical transmission
in the S301 register
Which mode do I want to use ?
Periodic
+
Alarm
When do I save the information?
I want to activate the
alarm and to save the
data every X seconds
I configure X in the
S320 register
When will my frame be sent?
I want a periodical
transmission and alarm
I configure activate the
periodical transmission
in the S301 register
I configure the
thresholds for S330 to
S332 for TVOC, S340 to
S342 for PM10, S350 to
S354 for PM2.5, S360
to S362 for PM1
Alarm on
exceeding
threshold
In alarm mode I do
not need to save the
information
I do not need to enter
a value in the S320
register
I want a frame when a
threshold is overpassed
I configure 0 in the
S301 register to
deactivate the periodic
transmission
I configure the
thresholds for S330 to
S332 for TVOC, S340 to
S342 for PM10, S350 to
S354 for PM2.5, S360
to S362 for PM1
Page
FR
EN
43
of 52
Publicité
Table des Matières
