Microsoft XBOX 360 Mode D'emploi page 4

ATTACH THE ADAPTER TO
YOUR STAND
Your wireless networking adapter is
designed to attach directly to the
adapter stand.
To attach your adapter stand:
Press the tabs on the adapter into
1
the two slots on the stand.
Connect the USB connector on the
2
adapter to the USB port on the
front of the stand.
Flip up the antenna.
3
NOTE
The antenna is designed to swivel
on only one axis. Do not swivel
the antenna in any direction other
than parallel with the adapter.
Connect the USB connector on the
4
adapter stand extension cable to
the USB port on the back of the
Xbox 360 console.
4
TROUBLESHOOTING
Console Doesn't Detect Adapter
on Stand
Make sure all USB connectors are
firmly and fully inserted on the stand
and in the console.