Errors And Remedies; Technical Specifications - Salvis Smartline Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en
7.

Errors and remedies

Check any faults in the appliance against the following table:
Fault
The green indi­
cator light does
not illuminate
when switched
on.
If you cannot remedy the fault,
‒ switch off the appliance and disconnect from the mains,
‒ Do not open the housing,
‒ Contact customer service.
8.

Technical specifications

Technical specifications
Item No.
Total connected load
Connected loads ć fuse protection
Thermal output, sensitive
Thermal output, latent
Length
Depth
Height
Overall height
Weight
Degree of protection against water
Appliance noise level
We reserve the right to make technical changes!
24 / 60
Possible cause
Main switch before appliance
not turned on.
There is no power supply at
all.
Mains fuse on site has
tripped.
Remedy
Turn on main switch.
Inform the power supply company.
Possible faults on the appliance must
be checked by an authorised Customer
Service agent.
Reset the circuit breaker.
Silofrit
ASF1: BI371852, BI373225
BSF1: BI371853, BI373226
1 kW
230 V 1N 50/60 Hz - 16A
0.13 kW
0.20 kW
380 mm
615 mm
208-218 mm, plus radiant heater 385 mm
593-603 mm
approx. 17 kg
IP X4
< 70 dB (A)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Silofrit asf1Bi371852Bi373225Silofrit bsf1Bi371853Bi373226

Table des Matières