Cleaning And Maintenance; Technical Data - ECG VM 2120 HOBBY Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54
Blower function
The vacuum cleaner offers a blower function as well. Replace the fabric filter with a sealing circular ring
before you start blowing. If necessary, attach the hose end to the air outlet (same as for suction) and attach
the accessories you want to use.

CLEANING AND MAINTENANCE

Warning:
Before any maintenance or cleaning always unplug the power cord from the power outlet.
Empty the vacuum cleaner container and remove and clean the filter before storing the vacuum cleaner.
You can wrap the power cord around the body of the vacuum cleaner, fit the floor nozzle with the attached
tube and hose in the holder on the side of the vacuum cleaner. The vacuum cleaner should be stored in
a room protected from weather conditions.
You can wipe the casing and the vacuum cleaner container if necessary with a damp cloth. The internal
parts of the vacuum cleaner should not be penetrated by water. Never use solvents or any other aggressive
cleaners or abrasives.
Never immerse the vacuum cleaner into water or any other liquid and do not leave it under running water.
No parts of the vacuum cleaner can be washed in the dishwasher.
Over time, hair or other dirt can be entangled on the vacuum cleaner wheels and the floor nozzle. Remove
them regularly to ensure easy handling of the vacuum cleaner. We do not recommend that you lubricate or
treat with oil the wheels and rollers of the floor nozzle. Dirt would catch on the greased parts even easier.
TROUBLESHOOTING
Before contacting the service, check the following list of common problems and possible remedies.
Problem
Possible cause
The motor will not
The vacuum cleaner is not
start.
powered.
The suction power
Clogged hose or tube, dirty
is reduced.
filters.

TECHNICAL DATA

Range: 8 m
Volume of the container: 12 l
Weight: 5.8 kg
Nominal voltage: 220–240 V~ 50/60 Hz
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into plastic
recycling containers.
PRODUCT DISPOSAL AFTER END OF LIFE
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specified location for recycling electric and electronic equipment. Prevent negative
impacts on human health and the environment by properly recycling your product. Recycling contributes to
preserving natural resources. For more information on the recycling of this product, refer to your local authority,
domestic waste processing organization or store, where you purchased the product.
This product complies with EU directives on electromagnetic compatibility and electrical safety.
The operating manual is available on internet at www.ecg-electro.eu.
Changes of text and technical parameters reserved.
Solution
Check the power cord and the electrical outlet. If the
device still does not work, contact an authorized service
centre.
Remove foreign objects from the hose or tube, replace
filters.
Nominal input power: 1,200 W
Noise level: 81 dB
Filter: foam filter
GB
08/05
37

Publicité

Table des Matières
loading

Table des Matières